Fabricated Steel Elevator Bucket
Material:Carbon Steel / Stainless Steel
Features:
• Manufactured by folding, punching, and welding.
• Well suited to hot applications or when extremely sharp products are carried in bucket elevators.
• Allow almost an infinite number of bucket designs to be realized, these could include thicker wear resistant leading edges, specialized bucket shapes and sizes, etc.
Using Recommendations
•Minimum bucket spacing: bucket projection “B” +25mm
• Mounting holes can be customized on request
Technical Specifications:
Model | Bucket Dimension* | Mounting Holes | Capacity | ||||||
Length | Proj. | Depth | Distance | Center | Number | Hole | Usable Capacity | Full Capacity | |
FSD2315 | 230 | 156 | 156 | 40 | 58 | 3 | 6.5 | 2.715 | 3.58 |
FSD2615 | 260 | 156 | 156 | 45 | 68 | 3 | 6.5 | 3.069 | 4.047 |
FSD2915 | 290 | 156 | 156 | 48 | 78 | 3 | 6.5 | 3.42 | 4.51 |
FSD3016 | 300 | 165 | 160 | 52 | 86 | 4 | 6.5 | 3.79 | 5.038 |
FSD3218 | 320 | 180 | 180 | 62 | 86 | 4 | 6.5 | 4.86 | 6.45 |
FSD3522 | 355 | 220 | 205 | 90 | 76 | 5 | 8 | 8.15 | 9.31 |
FSD3618 | 365 | 180 | 180 | 90 | 76 | 5 | 8 | 5.546 | 7.36 |
FSD3620 | 365 | 206 | 206 | 90 | 76 | 5 | 8 | 7.642 | 9.576 |
FSD4022 | 405 | 220 | 210 | 90 | 73 | 6 | 8 | 9.298 | 11.42 |
FSD4522 | 455 | 220 | 210 | 90 | 79 | 6 | 8 | 10.445 | 12.83 |
--------------------------------------------------------------------------------------------------------------------------------
Elevator Buckets
•High impact, abrasion resistance, no-corrosion, smooth surface, FDA Food proved.
•Less weight, prolong service life of buckets and belts, reduce elevator consumption.
•A direct replacement for many other international brands.
•Unique elevator bucket design with multiple patents.
•Our elevator buckets are well regarded, worldwide for high cost /quality ratio.
Material | HDPE | Nylon 6 | UHMWPE | PU | Mild Steel | Stainless |
Cost | 1 | 3 | 3 | 4 | 2 | 4 |
Wear Resistance | 1 | 2 | 3 | 4 | 3 | 4 |
Impact Resistance | 1 | 2 | 2 | 2 | 2 | 2 |
FDA Food Approved | Yes | Yes | Yes | No | No | No |
Max Temp℃ Continuous | 70 | 100 | 70 | 60 | 180+ | 250+ |
Max Temp℃ Peak | 80 | 120 | 80 | 70 | 220 | 400 |
Remark: Code 1=low 4=high
•HDPE: Tough and lexible, suitable for handling grains, foodstuffs, and other products with no sharp edges and material that has a bulk density of less than1g/cm³ .
•Nylon: High impact and abrasion resistance, better heat resistance and are well suited for handling hot, abrasive and sticky products.
•UHMWPE: Extremely abrasion resistance, corrosion resistant, impact absorbing properties, low temperature resistant, sanitary (FDA approved), Non-caking and sticking, now water absorption, light weight properties.Higher cost performance products.
•PU: Extremely abrasion resistance, tough and lexible, and are suitable for handling sharp, cutting and sticky products.
•Mild Steel: General purpose, long life, well suited to agricultural and industrial products.
•Stainless Steel: Food grade, corrosive resistance, suitable for food and high temperature applications.
------------------------------------------------------------------------------------------------------------------------------------